Rfid Temperature Tags To Solve The Problem Of Food Refrigeration And Heating

Rfid Temperature Tags To Solve The Problem Of Food Refrigeration And Heating

Altierre company located in San Jose, California, is committed to providing wireless solutions for retailers, today announced a new RFID Temperature detection tag, used to track store Food Refrigeration and heating conditions. The RFID system can be installed within a few hours. Typically, supermarkets temperature measurement system deployment costs about 15,000 dollars, including software, Tag And sensors. The sensor label to have installed Altierre wireless shelf label system can substantially reduce the cost of an RFID tag price is not more than 10 U.S. dollars.

According Altierre SunitSaxena Chairman and CEO said Midwest and Northwest regions of some food chains have begun to try Altierre developed RFID temperature sensing system. However, it did not disclose the name chain. Some shops have become Electronic Shelf label system (ESL) of the client. Other clients to the system as an independent solution, used in refrigeration systems, in which the installation Altierre sensor tags, readers and software, in order to obtain relevant data.

Ago, food retailers to send staff to record the cooling and heating system, the required time period, they manually record the temperature of notebook on the need to record every day 4 to 5 times. However, if the time outside the examination problems, such as the door is opened or equipment failure, staff can not discover.

Saxena said, Altierre’s new RFID temperature monitoring system to reduce the manual time-consuming to read the temperature and provide a high return on investment (ROI). In addition, a decrease of the loss items, such as stores find a freezer, refrigerator or heat the oven does not run properly, then the inside of the food on the need for timely treatment. The previous manual system can not discover the problem, resulting loss of food, resulting in loss costs. 60,000 square feet of local

usually need to install two Altierre reader, used to identify the retail outlets within the active RFID tags affixed Altierre2.4GHz, by special agreement between the data transmission, sensor size is 2.5 inches × tag 1.5 inches, 0.5 inches thick, can be placed directly inside the refrigerator or freezer. For example, the temperature sensor in a heating device chicken in full bloom, and in its external installation of RFID tags. The RFID tags continuously monitor the temperature, the code reader reads the tag and receives data in.

Install sensor tags, retail staff to use handheld interrogators to read the unique ID code, a label with the control of the heating or cooling equipment correspond with each other. If a device internal temperature of two degrees of change, the alarm transmitted to the store manager and maintenance staff to take corresponding measures. If the temperature is changing, then issue a second warning, the object is not only managers and maintenance personnel, as well as corporate headquarters, or other staff in the post, causing the problem seriously.

According to Saxena said, Altierre of RFID temperature monitoring system, other than the current temperature tracking solution to be outstanding. Although the hospital uses Wi-Fi or wireless ZigBee, RFID tags, the temperature tracking is common, but he said that Wi-Fi in some restrictions on the number of sensors, while a store may need hundreds or thousands of sensors.

Altierre companies release new products a week before the U.S. House of Representatives Energy And Commerce Committee issued a Food Safety Enhancement Act 2009 amendment, a vote by the full House of Representatives. The bill aims to improve food safety, the global market. Can be said that the company’s RFID system is Altierre came into being.

More exciting, please see>>

I am a professional writer from China Manufacturers, which contains a great deal of information about semi trucks trailers , price propane tank, welcome to visit!

Construction Software With Real Time Payroll Data – A Worthy Investment

Construction Software With Real Time Payroll Data – A Worthy Investment

Having the right tools for a job is almost as important as having the skills necessary to complete the task.  Yet, many construction companies fail to see the need for a construction accounting software package that captures payroll data in real time.  No doubt they have the skills to complete the job, but this tool can help to make that job more profitable. 

Payroll is an inherent piece of any construction project budget and final cost.  It reflects the manpower labor costs necessary to complete the job.  As such, it is key to have this data at your fingertips at all times and it needs to be as accurate as possible.  The most accurate way to collect this data is in real time.  Having real time data allows decision makers to make sure the project is properly directed and helps them make better decisions before and after deviations are made from the plan.

Estimating up to date figures is inaccurate and takes time, which costs money.  The amount of time it takes is often increased due to the pay structure of many construction companies – often workers with more diverse skill sets receive higher wages.  Calculating the potential costs for 12 workers for varying time periods that have different wages can get confusing and will most certainly take time away from activities that a manager could be doing that add value to the project. 

Real time data leaves no need to estimate or get confused about the financial impacts of using a different labor force.  Even data that is only a day or two old can lead to ineffective monitoring of the project’s bottom line, which can result in decisions being made a day or two later than they should have been.  The impact of these 2-day-late decisions on the bottom line can be pretty big if you consider multiple decisions like this made over the life of a project that lasts for several months. 

These factors have led construction software manufacturers to begin including as much real time data as possible, for good reason.  Today’s market moves faster than ever and new risks arise every day, requiring decisions to be made in the middle of the project that were not expected.  Would you rather make those decisions with the most accurate data you can possibly have or with old data and some estimates?

Beware, however, that too much real time data can be overwhelming at first.  If you’re used to working with the old system of old data and projections, a wealth of real time data can be intimidating.  However, after an initial getting used to period, you’ll soon realize that real time data leads is simply the best tool you can have when it comes time to make those on-the-fly decisions. 

In a perfect world, every construction project would be executed exactly according to plans and would finish exactly on budget.  However, unexpected changes, weather, supply chain issues, and other common hiccups lead to projects that rarely (if ever) follow the initial plan. 

For example, perhaps a big milestone is approaching for a particular project and the supervisor realizes that he does not have the personnel on hand that was planned to complete the task.  As a result, the supervisor has a different group complete the task.  Thus, the actual cost of that piece of the project will either be over or under the budgeted amount.  With real time payroll data, decision makers will be able to see those different costs reflected in actual costs as they happen.  With this data, they can make the best possible decision for how to make up for the overages and finish on budget or how to continue to operate under budget. 

Construction software with real time payroll data gives companies an additional bit of flexibility when executing a project.  Since deviation from the original plan is more of “the rule” versus the “exception,” being able to move forward with the project with the most accurate data possible is a benefit that is most certainly worth having.

David Kraft is a freelance author that specializ

 

Now Pay Close Attention —

Making money online with e-commerce is simpler than you’ve been told. Everyone faces the same two problems:

[Problem #1] How To Get Your Online Store Started

[Problem #2] How To Bring Traffic To Your Store To Produce Sales

ZamZuu has been solving these two problems for thousands of people! ZamZuu has been tried and tested and known to produce excellent results.

First: Visit ZamZuu Here
Learn How Your Can Start Your Own E-Commerce Store For Next To Nothing and Make THousands Monthly Using Our Proven Secrets!

Second: Sign Up For More Information From ZamZuu
We will show you exactly how you can start your e-commerce store and begin making profits online in as little as 7 days!

With over 2 Billion dollars being spend on e-commerce this year alone, online sales are a massive opportunity to make a great living online. But to take advantage of this amazing opportunity, it is always a good idea to get a head start on your competition with the help of a company that has been doing it for years. Visit http://www.takeforeveroff.com and learn how you can make a great living in e-commerce.

Warts and Skin Tags – Causes and Removal of These Skin Problems

Warts and Skin Tags – Causes and Removal of These Skin Problems

Warts and skin tags are growths of the skin that may appear in different parts of the body. Warts most often appear on the feet, hands and even on the soles of the feet and on the genitalia. Skin tags most often appear on the neck, the armpits, the groin, or on the eyelids – areas where there are skin folds.

Warts are caused by the infection of the human papilloma virus. These skin disorders look like cauliflowers and are usually solid or hard. Skin tags on the other hand are growths of the skin that tends to protrude or hangs off from the skin. Although these skin problems do not pose a threat to our bodies, these can however bring discomfort and embarrassment and can be a annoying.

Warts are contagious that touching them with your hands can spread the infection to other parts of your body especially if you have even a small cut on your skin. It can also be transferred through sharing of towels or other personal things.

The exact cause of skin tags, on the other hand, is not yet known, although it is most likely associated to the virus that causes warts – the human papilloma virus. It does not however cause the skin flaps but it is said to contribute to the appearance of skin flaps. These tumors on the skin are however not harmful but can be discomforting and embarrassing. For skin disorders that appear on the face, their occurrence in clusters may be unsightly, thus the need to remove or treat them. In some cases, it can be irritated and may lead to its bleeding, which is also another reason why there is a need for its removal.

If warts and skin tags are among your discomforts in life, there are actually ways that you can do to manage them or eliminate them. Among the methods in removing warts and skin tags are surgery, freezing the wart or the skin tags with liquid nitrogen in the process called cryosurgery, laser treatments or other gels, ointments an creams which mainly consist of salicylic acid. Some other techniques in removing the warts include suffocating it with the use of duct tape or applying pads on the warts added with salicylic acid. It is important to note that in the case of genital warts, it is wise to see your doctor when it comes to their treatment or removal.

The same with warts, flaps in the skin can also be removed by freezing them with liquid nitrogen until they fall off. Physicians may also remove them using scissors, or burning them in the process called cauterization, or remove them through excision.

Over the counter treatments are also available in dealing with warts and skin tags. Ointments, gels, pads and solutions containing salicylic acid are also available. Natural treatments are also options in dealing with warts and skin tags. There are ways to avoid its spreading, and there are also various herbs that home remedies that may help in the removal of warts and skin tags and even moles. Among the natural treatments are garlic, banana peel placed on plantar warts, castor oil, grapefruit seed extract and other natural remedies that may help you get rid of skin problems less the pain and the cost of medical procedures.

Carolyn Anderson wants to help you find natural solutions to common skin problems. To learn more about eliminating warts and skin tags naturally, check out No More Warts and Skin Tags Also check out Beat Eczema where you find ways to eliminate eczema as well.

PC Mag Awards its 2010 Backup Software Editors Choice

PC Mag Awards its 2010 Backup Software Editors Choice
And the PC Mag winner for backup software is…

StorageCraft’s ShadowProtect backup and disaster recovery software. If you have not heard of this company, take a quick look at their website. They form the backbone for many of the large backup software vendors servicing the backup and disaster recovery market.

PC Mag has once again awarded StorageCraft is Editors’ Choice Award for its drive image and backup software category. We thought you would enjoy some of the quotes from the review…

“StorageCraft’s ShadowProtect Desktop has been PC Magazine Editors’ Choice for drive imaging, and version 4.0 upholds the tradition”

“…new features that make it easier and faster to get your system up and running from a backup even after a complete hardware breakdown makes your original hardware unusable.”

“ShadowProtect Desktop doesn’t offer features that you can’t find elsewhere, but it performs those features more smoothly, reliably, quickly, and easily than any rival software”

“Like previous versions, it also includes a Hardware Independent Restore feature that lets you restore a backed-up image of a Windows system to completely different computer hardware. This is something you normally can’t do simply by copying a system from one computer to another, because Windows often won’t boot if it doesn’t find the hardware on which it was originally installed.”

“ShadowProtect’s new version adds a feature called Virtual Boot that lets you run a backed-up system as a “virtual machine”…The Virtual Boot feature automates a complex series of steps that you could also perform manually, using a ShadowProtect drive image and a VirtualBox or VMware Workstation.”

“But if your data and your system are of critical importance to you, you’re simply being reckless to operate without a local back up—preferably a complete drive image. And for drive-imaging software, there’s simple nothing better than ShadowProtect 4.0, our Editors’ Choice.”

“Still the absolute gold standard in system-backup products. Essential for anyone who relies on data stored on a computer.” PC Mag, 2010

Financial Crisis The Prospect Of China’s Tags – Tags, The Financial Crisis – Printing Industry

Financial Crisis The Prospect Of China’s Tags – Tags, The Financial Crisis – Printing Industry
July 6, 2009, China Development Forum tagging technology held in Shanghai. China Printing Equipment Industries Association, honorary chairman of the tagged branch Tan Jun Qiao on the global Financial Crisis in China label industry challenges and opportunities in-depth and detailed analysis.

Tan Jun Qiao said that this financial crisis sweeping the globe, on the label industry, is both a challenge and an opportunity for development. Therefore, the Chinese label industry must strengthen their awareness, to gain even greater development.

Eight new bright light in 2008 Label Industry
Although the financial crisis is not over, but the old Tan label industry development in China has given an optimistic assessment. He said, “label industry has developed rapidly in China, output growth above the world average level of development label industry, there is great market potential.” Review in 2008, eight new bright light industry in China Tags:

1,2008 gross industrial output value of China’s 15.5 billion tab.
2, RFID Expand the market, the Shanghai World Expo will also be interviewed in this way.

3, Founder pleasant development of inkjet digital presses.
4, part of the printing business grew rapidly, achieving expanded plant.
5, Electronic Prison official code budding.
6, the rapid development of oil printing business.
7, the first label contest by the very good results.
8, set up a China label Association, a member of more than 100. The new bright spot is supporting the development of the Chinese label industry hope.

To address deficiencies in the domestic label industry
Although the Chinese label industry developed rapidly, but the overall level of the developed countries there is not a small gap, which we must face the situation. Tan Jun Qiao said, we must not only address the status of the domestic label industry, as well as to identify the reasons causing this situation to better promote the development of the Chinese label industry.

His view, caused the domestic label industry lags behind the developed countries for many reasons, but it boils down to two main areas:

First, our per capita consumption of low levels of labeling. U.S. per capita consumption of 17 square meters label, Europe is 15 square meters to 12.8 square meters in Japan, but China was just one square meter (China label printing output 1.2 billion square meters, 1.3 billion less than the population average, per person 1 square meter).

Second, advanced equipment used in relatively backward areas. For example, the United States are basically using pollution-free flexo technology, 60% of European companies using flexo, gravure by 40%, while China is basically to use gravure printing, as well as individual use Offset printing Technology.

Third, the use of new technologies lag behind. Such as multi-layer labels, RFID tags, combined print and membrane labeling, the amount is small, and some has not yet developed, it is precisely these aspects of the current urgent need for development.

Change the future with the label industry, digital

Tam Chun Qiao said that, our country is concerned, is the RFID tags and digital label printing technology the greatest opportunity, mainly because our label market is still being developed, due to the particularity of the Chinese market, the label is still in the field ” two heavy, intermediate light “status, that is, low-level labels take a lot of consumer markets, such as: Food Market and part of the day of the market.

We are high quality suppliers, our products such as 7 Inch Digital Photo Frames Manufacturer , PSP MP5 Player for oversee buyer. To know more, please visits PSP MP5 Player .

Memorial Inscription: Format, Ideas and Quotes for Urn or Headstone Epitaph

Memorial Inscription: Format, Ideas and Quotes for Urn or Headstone Epitaph

When suddenly faced with the death of a loved one and the myriad of decisions about final arrangements, memorial service details, burial or cremation, etc., it is often difficult to sit and think well about what to put on a memorial stone or cremation urn as an epitaph to commemorate a loved one’s life. Here are some standard formatting options and ideas for headstone and urn inscriptions to start you on the right track.

Standard Inscription Format:

In Loving Memory
John Doe
January 1, 1943 – December 31, 1999

Other first lines:

In Memorium

In Remembrance

In Fondest Memory Of

In Treasured Memory Of

In Honored Memory Of

In Cherished Memory Of

Happy Memories Of

Other epitaph date formats:

1/1/43 – 12/31/99

1/1/1943 – 12/31/1999

Jan. 1, 1943 – Dec. 31, 1999

1943 – 1999

Additional Lines:

Often a short epitaph, 2-15 words in length, will be engraved below the dates. See below for list of short epitaphs. The format would then look like this:

In Loving Memory
Jane Doe
January 1, 1943 – December 31, 1999
Faithful Wife, Loving Mother

Engraving a middle name:

John D. Doe

John David Doe

Engraving a nickname:

John “Jack” Doe

Bible Verses for Headstone or Urn Inscription:

(For more Scripture verses fit for an epitaph, click here.)

Love is patient, love is kind.

Blessed are the pure in heart, for they shall see God.

God is our refuge and our strength.

The steadfast love of the Lord never ceases.

Faith is being sure of what we hope for and certain of what we do not see. (NIV)

Now faith is the assurance of things hoped for, the conviction of things not seen. (ESV)

He gives His beloved sleep.

The Lord bless thee and keep thee;
The Lord make His face to shine upon thee, and be gracious unto thee;
The Lord lift up His countenance upon thee and give thee peace.

And so we will be with the Lord forever.

We live by faith, not by sight.

Short Epitaph Poems for Headstone or Urn Inscription:

You are not forgotten, loved one
Nor will you ever be
As long as life and memory last
We will remember thee

Memory is a lovely lane,
Where hearts are ever true,
A lane I so often travel down,
Because it leads to you.

His charming ways and smiling face,
Are a pleasure to recall,
He had a kindly word for each,
And died beloved by all.

A silent thought, a secret tear,
Keeps his memory ever dear.
Time eases the edge of grief,
Memory turns back every leaf.

Be Thou my vision, O Lord of my heart
Naught be all else to me, save that Thou art
Thou my best thought, by day or by night
Waking or sleeping, Thy presence my light.

Be still, my soul: the hour is hastening on
When we shall be forever with the Lord.
When disappointment, grief and fear are gone,
Sorrow forgot, love’s purest joys restored.
Be still, my soul: when change and tears are past
All safe and blessèd we shall meet at last.

Though absent you are very near
Still loved, still missed, and very dear

There is a link death cannot sever,
Love and remembrance last forever

Remembered always with love sincere
Memories keep him ever near

You still live on in the hearts and minds
Of the loving family you left behind

Rock of Ages, cleft for me
Let me hide myself in Thee

Short Epitaphs for Headstone or Urn Inscription:

Loving Father, Husband, Brother, and Friend

Loving Mother, Wife, Sister, and Friend

Faithful and Loving Husband

Faithful and Loving Wife

  (etc.)

Sadly Missed, Lovingly Remembered

Forever Remembered, Forever Missed

Safe In the Arms of Jesus

Asleep In Jesus

He, Being Dead, Yet Speaketh (Hebrews 11:4)

Absent From the Body, Present With the Lord

In God’s Care

I Know My Redeemer Lives

We Love You Always

He Loved and Was Loved

In the Cross of Christ I Glory

A Mighty Fortress Is Our God

Blessed Are the Dead That Die In the Lord

In His Keeping

In God’s Hand

Forever In Our Hearts

At Rest

At Peace

Though Gone From Sight To Memory Dear

Until We Meet Again

Safe At Last the Harbour Past

Forever In Our Thoughts

Rest In Peace

May He Rest In Peace

May She Rest In Peace

Much Loved

Peace At Last

If you are searching for an urn to engrave, Urns Northwest offers a wide variety of wood and other cremation urns which can be engraved with a personalized inscription.

Daniel Szczesniak is manager for retail cremation urn website Urns Northwest.

How to Edit ID3 Tags – Organize Itunes with the Best ID3 Tag Editor

How to Edit ID3 Tags – Organize Itunes with the Best ID3 Tag Editor

TidySongs Review

Have you ever tried to edit ID3 tags yourself? Not too fun, huh? Trying to edit ID3 tags yourself can be a pain because of the amount of time it takes. It’s boring, it takes forever, and it involves lots of research, alone. Besides, if you’ve got a lot on your agenda, you probably don’t have time for all of that nonsense anyway! However, it’s essential to edit ID3 tags because it helps to keep the MP3s in your music collection organized, neat, and clean of errors. Instead of wasting time manually trying to clean up the music library yourself, turn to a respected and popular program to edit ID3 tags for you!

TidySongs is a fairly new music organizing software that has gained a lot of momentous respect as of late. TidySongs makes cleaning your music library up as easy as 1, 2, 3! Forget spending hours on the computer trying to locate album art, production years, correct genres, and tons of other information that would really just take forever to find.

Instead, let TidySongs do all the work. With this groundbreaking software, you can do a number of things within minutes to your library making it more efficient than ever! Some of these features include the ability to:

• Find and download the correct album artwork for your MP3s
• Delete any duplicate songs you may have in your music collection (clearing up hard drive space)
• Correct typos and misspelled word in the metadata of your MP3s
• Fill in blank parts of the metadata
• Connect to an online database that contains tons of valuable information about music so that TidySongs can quickly fix your library
• Bring automatic ID3 tag editing to life without sacrificing control from the user
• And much more

Face it; if you’ve got a copy of iTunes or Windows Media Player, you need this software to quickly edit ID3 tags and ultimately enhance your music collection. Avid music listeners all around the world have been downloading this software because of the simplicity that it brings to ID3 tag editing. Even if you don’t like the idea of TidySongs calling the shots about what’s changed, you can even configure the program to ask you whether you approve of the changes made or not. Nothing’s set in stone and you can retain full control if you’d like!

Using TidySongs is a cinch and just using the program once will prove that. If you’re serious about keeping a music collection, you need to check out TidySongs for all of your ID3 tag editing needs.

If your music collection is a mess and full of “Track 01” and “Unknown Artist” you can organize iTunes automatically in minutes!

Fix mislabeled music, download album art, delete iTunes duplicates, and complete missing ID3 tags with the best iTunes organizer on the market. Click the link above or copy and past this url in to your address bar for a full review of the program and its features, complete with a video tutorial on how to use the software.

*New* Click here for a Tidysongs Promo Code!

OrganizeiTunes.net

OrganizeiTunes.net

Mp3 Tag Repair – How to Repair Mp3 Tags Automatically

Mp3 Tag Repair – How to Repair Mp3 Tags Automatically

Mp3 tag repair can be tricky and a very long task if you don’t have any music organizing software. Find out how to automatically repair mp3 tags with just the click of your mouse!

Back when the only way to get music on your computer was to burn it from a CD keeping digital music libraries in order was pretty easy. If you were online most media players would find the album info for you. And if not at least you had the CD booklet so you could make sure you named the tracks properly. No one likes seeing Track 01 by Unknown Artist! Repairing mp3 tags was never an issue.

Now times have changed and most of us get our music off the internet. This has opened the door for disarray in our music libraries. The problem stems from uploaders not taking the time to enter the correct ID3 tags for songs. So when we download them we’ve inherited their mess. That is why mp3 tag repair has become so important for music enthusiasts.

The solution to this is to find mp3 tag repair software. I stumbled across software that can automatically fix mp3 ID3 tags and much more. The application actually listens to you music and runs that info through an enormous online database to determine what song it is. After that the correct song and album information is synced with the mp3 files.

Here are more great features!

Deletes Duplicate Tracks
Organizes Genres
Gets Album Artwork
Fixes Misspelled Songs (Even Track 01’s)
No Typing Involved

With benefits like that this software has changed mp3 tag repair forever. I’ll never have to worry about having an unorganized iTunes library again.

If your music collection is a mess and full of “Track 01” and “Unknown Artist” you can organize iTunes automatically in minutes!

Fix mislabeled music, download album art, delete iTunes duplicates, and complete missing ID3 tags with the best iTunes organizer on the market. Click the links above or copy and past this url in to your address bar for a full review of the program and its features, complete with a video tutorial on how to use the software.

OrganizeiTunes.net

Windows ID3 Tag Editor – How to Automatically Edit ID3 Tags in Windows

Windows ID3 Tag Editor – How to Automatically Edit ID3 Tags in Windows

If your music library if full of misspelled songs, track 01’s, or duplicate songs a Windows ID3 tag editor is what you need! This software can fix MP3 tags automatically while you spend your time with more important things, like enjoying your music.

Why are ID3 Tags Important

ID3 tags are the basis of organizing your music. These are what almost every music digital music player uses to sort music files. The music tags hold information including but not limited to song name, artist or band name, album release year, genre, and sometimes even lyrics!

Manually Editing Music Tags

Going through your vast music collection and editing the tags manually could take forever. And if after all the time you spend researching song and album information, you make a clerical mistake entering in the info it will all be for nothing! It only takes one wrong letter to contribute to the messy music library.

Automatically Editing Music Tags

Luckily for us music lovers there is a Windows ID3 tag editor that can save us time and headaches. The program can scan music files and compare them with files stored in an online music database. When a match is found, the ID3 tags are automatically downloaded to the correct song files. That is how songs labeled Track 01 can be corrected. The software does not rely on the current song name or tag info. It uses the digital/acoustic data within the song to cross-reference.

A Windows ID3 Tag Editor can…

Find Missing Cd Cover Art
Fix Incorrect Spelling of Songs
Complete or Correct ID3 Tags
Remove iTunes Duplicates
And More…

With the ease and popularity of online music downloads the average music library contains thousands of songs. You can now organize those songs easily with a Windows ID3 tag editor.

If your music collection is a mess and full of “Track 01” and “Unknown Artist” you can fix MP3 tags automatically in minutes!

Fix mislabeled music, download album art, delete iTunes duplicates, and complete missing ID3 tags with the best ID3 tag editor on the market. Click the links above or copy and past this url in to your address bar for a full review of the program and its features, complete with a video tutorial on how to use the software.

Fixmp3tags.com

Twitter – The Free Way to Increase Your Followers

Twitter – The Free Way to Increase Your Followers

Twitter is an interesting idea. Its basically a computerized global text, just like you do on the phone. Its not as restrictive as face book (limit to 5000 people), however it also is not as personal, but its a great way to keep up, by tweeting. That’s what the message is called. You can also Dm, direct message.

You basically have followers and Following. Followers are people that follow you, or that see your messages. Following are people you follow, or receive messages from them.

So its a form of networking, a lot of time with people you don’t know. As with any form, of networking, I don’t recommend selling straight off the bat. On facebook and twitter, a lot of people hit you between the eyes. Like all forms of networking, a relationship needs to be formed. So a good model I have learnt is 30% social, 60% information and 10% promoting sales.

But first you need to build your list. So here are a number of great programs that are available free. That will help you build your list.

Tweetdeck: a great way to keep an overview of your tweets, direct messages etc are all displayed and you can reply here.

Ping.fm This allows you broadcast your tweets, across multiple networks, incl. MySpace, Facebook and of course twitter. So one entry goes a long way

Tweetspinner, is on of my favourites. You can track keywords and follow people that tweet about these keywords. Also you can set ratios and follow people back quickly.

Twubble is another way to follow friends of friends. Its time consuming but good

These have allowed my in 3 weeks increase my followers by 3000. Not bad!

There is also a theory that Twitter have a magic number of 2000, you need to keep your followers and following balance within 7%. I don’t know if this is true, but look after it, just in case. If you have more followers than you are following, twitter loves you.

These are the tools I have used to go from 40 follows to 5000+ in five weeks. I know people tell you that they are other ways, this is how I actually did it.

happy tweeting

Anthony Mc Carthy, the ‘Irish Marketer’ has over twenty five years experience in business. If you want to make money then go to http://potofgoldnews.com where you can take the first step into internet marketing and making money on line. It will help you to take the first steps into the field and also into business. A lot of fledgling internet entrepreneurs, have no business experience. or don’t know the steps to take to having a business on line.